Spoken Tutorial, IIT Bombay 
	        https://spoken-tutorial.org     

			eSim
	Mixed Signal Simulation using Ngveri - Assignment

1.Open the file shift.v in Makerchip - NgVeri
2.shift.v file is available in codefile link
3.Run Verilog to NgSpice Converter
4.If Model created successfully, create a new project
5.Create a new schematic using the shift block
6.Generate Netlist and run KiCad to Ngspice Converter
7.Add simulation parameters and run the simulation
8.Verify the input and output plots