Xcos Introduction - Khasi
This is a sample video. To access the full content,
please
Login
- Questions posted on Forums
- Scilab Tutorials - Khasi
-
graph bot getting generated
Dear Sir/Madam,I am not able to generate response for R-L circuit using electrical components-R,L, Ground, Power supply, cscope and clock.Basically, final integration time in set up is not getting set to 30 as per the cscope parameters.Though the circuit does not show any error but the graph is not generated as it should be.However, using transfer function and step input, I am able to generate but I want using R and L components.Pl help
04-05M 0-10S vajoshi@vpmthane.org
Answer last updated on: May 22, 2025, 12:08 p.m.
-
How to get an error message in XCOS?
I have one simulation model and still did not figure it out what is the error as error message is not showing up. Thank youThe error is that my simulation work only for 0 second which is error but I dont how to overcome it. I will pay 400INR for it if someone solve the error and explain me like tutions. Thank you "[verboseMessage] time = 0] {} Kalman_Filter_SIM: Calling with flag Ending(5)" "End of simulation for Kalman Filter block." "[verboseMessage] time = 0] {} System_SIM: Calling with flag Ending(5)"</span>
00-01M 0-10S vimsrocz@gmail.com
Answer last updated on: May 22, 2025, 12:03 p.m.
-
CSV file
What are the steps that need to be followed to create a csv file?
00-01M 0-10S sonarariddhisonarariddh
Answer last updated on: Nov. 22, 2023, 11:07 a.m.
-
discussion 17
how I find xcos in 6.1.0 version of scilab
01-02M 0-10S riddhipathak
Answer last updated on: Oct. 7, 2020, 3:34 p.m.
-
how to assign xcos palettes
for energy simulations how to assign xcos palettes
03-04M 10-20S krish10
Answer last updated on: Oct. 7, 2020, 8:48 a.m.
-
Cannot find Commonly used blocks
In Palette browser, I can not see the 'Commonly used blocks' option. I am using Scilab 6.1.0 on Ubuntu.
01-02M 10-20S hbammkanti
Answer last updated on: Sept. 16, 2020, 2:50 p.m.
-
Title and Border of the graph is not visible.
I cannot see the title and border of the graph. I am using Scilab 6.1.0 on Ubuntu 18.04.
05-06M 50-60S hbammkanti
Answer last updated on: Sept. 16, 2020, noon
-
Cannot find transfer function block
I am using Scilab 6.1.0 on Ubuntu 18.04. I am not able to find the transfer function block in Continuous time system palette.
01-02M 30-40S hbammkanti
Answer last updated on: Sept. 16, 2020, 11:59 a.m.
-
Scilab is compiled without GUI
cscope: Scilab is compiled without GUI, can not !!use !! !!Scope. please provide answer for my question
05-06M 10-20S raghava206
Answer last updated on: June 13, 2020, 11:10 p.m.
-
Xcos not clear
we need more tutorial on xcos. basically i am computer science, so kindly do the needful
03-04M 20-30S nandhujee40@gmail.com
Answer last updated on: May 10, 2020, 10:26 p.m.
-
xcos
Hi ThereWhen I try to simulate electrical circuits using Xcos, following message apperas, although it runs mathematical modules:Main Modelica : C:\\Users\\nrahate\\AppData\\Local\\Temp\\SCI_TMP_14588_18094\\Switched_capacitor_integrator_im.mo Flat Modelica : C:\\Users\\nrahate\\AppData\\Local\\Temp\\SCI_TMP_14588_18094\\Switched_capacitor_integrator_imf.mo Simulation C code :C:\\Users\\nrahate\\AppData\\Local\\Temp\\SCI_TMP_14588_18094\\Switched_capacitor_integrator_im.c Generate a loader file Generate a Makefile Running the Makefile Compilation of Switched_capacitor_integrator_im.c Building shared library (be patient) '"C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\VC\\vcvarsall.bat"' is not recognized as an internal or external command, operable program or batch file.!'"C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\VC\\vcvarsall.bat"' is not recogni!!zed as an internal or external command, !! !!operable program or batch file. !! !!'nmake' is not recognized as an internal or external command, !! !!operable program or batch file. !!sorry compiling problem !! !!ilib_compile: Error while executing Makelib.mak. ! c_pass1: build the modelica meta-block failed xcos_simulate: Error during block parameters update.
00-01M 0-10S NitaPanhale
Answer last updated on: May 8, 2020, 10:14 a.m.
-
block
hello, i am encountering problem using xcos application in scilab. whenever i try to change the default values of a block, the application stops working. can anybody tell me way to resolve this issue?i am using scilab 6.1.0 (64-bit) on windows8. thanks
01-02M 0-10S astha95
Answer last updated on: May 4, 2020, 10:44 a.m.
-
Xcos
How to resolve the following: Modelica blocks are reduced to a block with:\r\n \r\n \r\n Number of differential states: 0\r\n \r\n \r\n Number of algebraic states: 3\r\n \r\n \r\n Number of discrete time states : 0\r\n \r\n \r\n Number of zero-crossing surfaces: 2\r\n \r\n \r\n Number of modes : 2\r\n \r\n \r\n Number of inputs : 0\r\n \r\n \r\n Number of outputs: 3\r\n \r\n \r\n Input/output dependency:[T]\r\n \r\n \r\n Analytical Jacobian: enabled (%Jacobian=%t)\r\n \r\n \r\n Parameter embedding mode: enabled (%Modelica_ParEmb=%t)
00-01M 10-20S NitaPanhale
Answer last updated on: Feb. 5, 2020, 3:39 p.m.
-
Require more spoken tutorial regarding Xcos
As the descriptions are not available regarding the options available in palette, it is difficult to solve the assignment. And the physics of the question has to be understood before solving it.
07-08M 0-10S dsatish.3
Answer last updated on: May 4, 2019, 4:36 p.m.
-
Regarding Description about the different Palettes
what are palettes? what is its application?Also, how to understand about all the options available in palettes. (for eg - what is CLR : in continuous time systems)
02-03M 10-20S dsatish.3
Answer last updated on: May 4, 2019, 4:33 p.m.
-
Not getting which block is to be taken as transfer function block.
I m not getting which block should be taken as second order transfer function block
07-08M 10-20S Himshi
Answer last updated on: May 4, 2019, 4:08 p.m.
-
Error when trying to drag blocks from Palettes
\r\n \r\n I am getting the following error in scilab 5.5.2 XcosDefaultTeXFont.xml: error reading font 'fonts/latin/jlm_cmr10.ttf'. Error \r\n message: Problem reading font data.\r\n \r\n\r\n
08-09M 0-10S omsrisairam
Answer last updated on: May 4, 2019, 3:26 p.m.
-
Problem in simulation
Selected tools are not available.
02-03M 40-50S Jitendra2019
Answer last updated on: May 4, 2019, 3:10 p.m.
-
xcos
Not opening. got the error 999
00-01M 50-60S ulka.padwalkar
Answer last updated on: May 4, 2019, 1:51 p.m.
-
problem in scope parameters
We can not define the scope parameters as per your data. i am using 5.2.2 is this real problem.
04-05M 20-30S prem_verma
Answer last updated on: April 16, 2019, 4:15 p.m.
-
XCOS not working properly in Scilab
Dear Sir,Please find the attachment of screenshots which elaborates the error received during execution of DEMO in Scilab>Demonstration>Xcos>Electrical System> Please help us in solving this problem ...
03-04M 10-20S chintanthacker
Answer last updated on: May 13, 2016, 11:43 a.m.
-
Unable to open xcos(!--error 999)
I am using Scilab 5.5.2I tried to open xcos as was mentioned in tutorial but I get this errorxcos: 28);if with_module("xcos") then xcos(); else disp(gettext("Please install xc !--error 999 xcos: while executing a callback ThanksParvesh Taneja
00-01M 50-60S taneja
Answer last updated on: Dec. 29, 2015, 4:55 a.m.
-
1
Installing -
2
Getting Started -
3
Vector Operations -
4
Matrix Operations -
5
Conditional Branching -
6
Iteration -
7
Scripts and Functions -
8
Plotting 2D graphs -
Xcos Introduction -
10
File handling -
11
User Defined Input and Output -
12
Integration -
13
Solving Non linear Equations -
14
Linear equations Gaussian Methods -
15
Linear equations Iterative Methods -
16
Interpolation -
17
ODE Euler methods -
18
ODE Applications -
19
Optimization Using Karmarkar Function -
20
Digital Signal Processing -
21
Control systems -
22
Discrete systems -
23
Calling User Defined Functions in XCOS
Questions posted on ST Forums:
640 visits
Outline:
Ka lamphrang sha ka Xcos Kaei ka XCOS. Kaei ka palette. Ban lum ia ki blocks na ka palette bad ban pyniasnoh ia ki ban shna ia ka block diagram Set ia ki parameters jong ki blocks bapher bapher. Ban setup ia ki simulation parameters. Simulate ia ka block diagram ba la dep shna..
| Width: | 800 | Height: | 640 |
|---|---|---|---|
| Duration: | 00:08:20 | Size: | 3.6 MB |
Show video info
