Xcos Introduction - Oriya

Questions posted on ST Forums:

• graph bot getting generated

  Dear Sir/Madam,I am not able to generate response for R-L circuit using electrical components-R,L, Ground, Power supply, cscope and clock.Basically, final integration time in set up is not getting set to 30 as per the cscope parameters.Though the circuit does not show any error but the graph is not generated as it should be.However, using transfer function and step input, I am able to generate but I want using R and L components.Pl help

  04-05M 0-10S unanswered vajoshi@vpmthane.org
  
  
  Question posted on: Jan. 6, 2025, 9:53 a.m.

  ---

• How to get an error message in XCOS?

  I have one simulation model and still did not figure it out what is the error as error message is not showing up. Thank youThe error is that my simulation work only for 0 second which is error but I dont how to overcome it. I will pay 400INR  for it if someone solve the error and explain me like tutions. Thank you  "[verboseMessage] time = 0] {} Kalman_Filter_SIM: Calling with flag Ending(5)"  "End of simulation for Kalman Filter block."  "[verboseMessage] time = 0] {} System_SIM: Calling with flag Ending(5)"</span>

  00-01M 0-10S unanswered vimsrocz@gmail.com
  
  
  Question posted on: Nov. 7, 2024, 4:48 a.m.

  ---

• CSV file

  What are the steps that need to be followed to create a csv file? 

  00-01M 0-10S sonarariddhisonarariddh
  
  
  Answer last updated on: Nov. 22, 2023, 11:07 a.m.

  ---

• discussion 17

  how I find xcos in 6.1.0 version of scilab

  01-02M 0-10S riddhipathak
  
  
  Answer last updated on: Oct. 7, 2020, 3:34 p.m.

  ---

• how to assign xcos palettes

  for energy simulations how to assign xcos palettes

  03-04M 10-20S krish10
  
  
  Answer last updated on: Oct. 7, 2020, 8:48 a.m.

  ---

• Cannot find Commonly used blocks

  In Palette browser, I can not see the 'Commonly used blocks' option. I am using Scilab 6.1.0 on Ubuntu.

  01-02M 10-20S hbammkanti
  
  
  Answer last updated on: Sept. 16, 2020, 2:50 p.m.

  ---

• Title and Border of the graph is not visible.

  I cannot see the title and border of the graph. I am using Scilab 6.1.0 on Ubuntu 18.04.

  05-06M 50-60S hbammkanti
  
  
  Answer last updated on: Sept. 16, 2020, noon

  ---

• Cannot find transfer function block

  I am using Scilab 6.1.0 on Ubuntu 18.04. I am not able to find the transfer function block in Continuous time system palette.

  01-02M 30-40S hbammkanti
  
  
  Answer last updated on: Sept. 16, 2020, 11:59 a.m.

  ---

• Scilab is compiled without GUI

  cscope: Scilab is compiled without GUI, can not !!use                                             !!                                                !!Scope. please provide answer for my question

  05-06M 10-20S raghava206
  
  
  Answer last updated on: June 13, 2020, 11:10 p.m.

  ---

• Xcos not clear

  we need more tutorial on xcos. basically i am computer science, so kindly do the needful

  03-04M 20-30S nandhujee40@gmail.com
  
  
  Answer last updated on: May 10, 2020, 10:26 p.m.

  ---

• xcos

  Hi ThereWhen I try to simulate electrical circuits using Xcos, following message apperas, although it runs mathematical modules:Main Modelica : C:\\Users\\nrahate\\AppData\\Local\\Temp\\SCI_TMP_14588_18094\\Switched_capacitor_integrator_im.mo Flat Modelica : C:\\Users\\nrahate\\AppData\\Local\\Temp\\SCI_TMP_14588_18094\\Switched_capacitor_integrator_imf.mo Simulation C code :C:\\Users\\nrahate\\AppData\\Local\\Temp\\SCI_TMP_14588_18094\\Switched_capacitor_integrator_im.c   Generate a loader file   Generate a Makefile   Running the Makefile   Compilation of Switched_capacitor_integrator_im.c   Building shared library (be patient)   '"C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\VC\\vcvarsall.bat"' is not recognized as an internal or external command,   operable program or batch file.!'"C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\VC\\vcvarsall.bat"' is not recogni!!zed as an internal or external command,                                                !!                                                                                       !!operable program or batch file.                                                        !!                                                                                       !!'nmake' is not recognized as an internal or external command,                          !!                                                                                       !!operable program or batch file.                                                        !!sorry compiling problem                           !!                                                  !!ilib_compile: Error while executing Makelib.mak.  ! c_pass1: build the modelica meta-block failed xcos_simulate: Error during block parameters update.

  00-01M 0-10S NitaPanhale
  
  
  Answer last updated on: May 8, 2020, 10:14 a.m.

  ---

• block

  hello, i am encountering problem using xcos application in scilab. whenever i try to change the default values of a block, the application stops working. can anybody tell me way to resolve this issue?i am using scilab 6.1.0 (64-bit) on windows8. thanks

  01-02M 0-10S astha95
  
  
  Answer last updated on: May 4, 2020, 10:44 a.m.

  ---

• Xcos

  How to resolve the following:       Modelica blocks are reduced to a block with:\r\n \r\n \r\n Number of differential states: 0\r\n \r\n \r\n Number of algebraic states: 3\r\n \r\n \r\n Number of discrete time states : 0\r\n \r\n \r\n Number of zero-crossing surfaces: 2\r\n \r\n \r\n Number of modes : 2\r\n \r\n \r\n Number of inputs : 0\r\n \r\n \r\n Number of outputs: 3\r\n \r\n \r\n Input/output dependency:[T]\r\n \r\n \r\n Analytical Jacobian: enabled (%Jacobian=%t)\r\n \r\n \r\n Parameter embedding mode: enabled (%Modelica_ParEmb=%t)     

  00-01M 10-20S NitaPanhale
  
  
  Answer last updated on: Feb. 5, 2020, 3:39 p.m.

  ---

• Require more spoken tutorial regarding Xcos

  As the descriptions are not available regarding the options available in palette, it is difficult to solve the assignment. And the physics of the question has to be understood before solving it.

  07-08M 0-10S dsatish.3
  
  
  Answer last updated on: May 4, 2019, 4:36 p.m.

  ---

• Regarding Description about the different Palettes

  what are palettes? what is its application?Also, how to understand about all the options available in palettes. (for eg - what is CLR : in continuous time systems) 

  02-03M 10-20S dsatish.3
  
  
  Answer last updated on: May 4, 2019, 4:33 p.m.

  ---

• Not getting which block is to be taken as transfer function block.

  I m not getting which block should be taken as second order transfer function block

  07-08M 10-20S Himshi
  
  
  Answer last updated on: May 4, 2019, 4:08 p.m.

  ---

• Error when trying to drag blocks from Palettes

  \r\n \r\n I am getting the following error in scilab 5.5.2 XcosDefaultTeXFont.xml: error reading font 'fonts/latin/jlm_cmr10.ttf'. Error \r\n message: Problem reading font data.\r\n \r\n\r\n

  08-09M 0-10S omsrisairam
  
  
  Answer last updated on: May 4, 2019, 3:26 p.m.

  ---

• Problem in simulation

  Selected tools are not available.

  02-03M 40-50S Jitendra2019
  
  
  Answer last updated on: May 4, 2019, 3:10 p.m.

  ---

• xcos

  Not opening. got the error 999

  00-01M 50-60S ulka.padwalkar
  
  
  Answer last updated on: May 4, 2019, 1:51 p.m.

  ---

• problem in scope parameters

  We can not define the scope parameters as per your data. i am using 5.2.2 is this real problem.

  04-05M 20-30S prem_verma
  
  
  Answer last updated on: April 16, 2019, 4:15 p.m.

  ---

• XCOS not working properly in Scilab

  Dear Sir,Please find the attachment of screenshots which elaborates the error received during execution of DEMO in Scilab>Demonstration>Xcos>Electrical System> Please help us in solving this problem ...   

  03-04M 10-20S chintanthacker
  
  
  Answer last updated on: May 13, 2016, 11:43 a.m.

  ---

• Unable to open xcos(!--error 999)

  I am using Scilab 5.5.2I tried to open xcos as was mentioned in tutorial but I get this errorxcos:   28);if with_module("xcos") then xcos(); else disp(gettext("Please install xc                                       !--error 999 xcos: while executing a callback ThanksParvesh Taneja

  00-01M 50-60S taneja
  
  
  Answer last updated on: Dec. 29, 2015, 4:55 a.m.

  ---