The Tutorials in this series are created in OpenIPSL 1.5.0 on Ubuntu 16.04 OpenModelica is an open source modelling and simulation environment intended for industrial and academic usage. The OpenIPSL or Open-Instance Power System Library is a library of power system component models written in the Modelica language that can be used for power system dynamic analysis, such as phasor time-domain simulations. The purposes of OpenIPSL are to be used for research and education with maximum compatibility with OpenModelica, to provide a free/libre and cost-free alternative for power system dynamic simulation and to provide as many as possible typical "test networks" for use in research and teaching. Read more
Foss : OpenModelica OpenIPSL - English
Outline: what is a smib system demonstration of smib system simulation of a three phase balanced fault in smib system use of "check all models" to validate the model solvability signi..
Outline: *What is a controlled SMIB system *How to model a controlled SMIB system *What is an Automatic Voltage Regulator(AVR) *What is a Power System Stabiliser(PSS) *Components requir..
Outline: *How to enter the parameter values of components *How to enter the power flow data *Initializing e1q start and e2q start as true value *How to check the created model *How to s..
Foss : OpenPLC with LDmicro - English
Outline: About PLC Embedded devices vs PLC About OpenPLC About LDmicro Features of OpenPLC About OpenPLC website developed by the FOSSEE team What can you expect in this series? Who..
Outline: What is LDmicro? Installation of LDmicro Check the LDmicro version What is AVRDUDE? How to install AVRDUDE? How to check the version of AVRDUDE ? What is USBasp Programmer? ..
Outline: What is LDmicro? Installation of LDmicro on Windows What is AVRDUDE? How to install AVRDUDE on Windows? How to check the version of AVRDUDE ? What is USBasp Programmer? Why d..
Outline: LDmicro interface Rungs Rails Instructions Instructions toolbar I/O list Multiple inputs and Multiple outputs in a rung Adding/Deleting a rung Renaming instructions Saving..
Outline: LDmicro simulator Simulation mode Real-time simulation Single cycle option Halt simulation Effect of cycle time on simulation Pre-compilation checklist Microcontroller selec..
Outline: About OpenPLC Mainboard Input power unit 24V, 2A power supply Output power section 4 different types of connectors ATMega16 microcontroller 4 I/O ports ISP header USBasp p..
Outline: Programming OpenPLC Mainboard Using USBasp to program the Mainboard Connect SMPS and USBasp to the Mainboard Check the programmer connection AVRDUDE command to upload HEX file ..
Outline: About OpenPLC Traffic Light module Where can this module be used? Different ways to connect using single LED connections How to use LEDs with the connectors at the bottom of the..
Outline: Connection of SMPS and USBasp to the Mainboard About types of Coils About source types for Coils Working of Normal Coil in LDmicro Real-time simulation of Normal coil Microcon..
Outline: Connection of SMPS and USBasp to the Mainboard Insert contact Different types of Contact Working of Normal Contact in LDmicro Real-time simulation of Normal Contact Microcontr..
Outline: Connection of SMPS and USBasp to the Mainboard Insert Coil and select Negated Real-time simulation of Negated Coil Make hardware connections for the Negated Coil using traffic l..
Outline: Connection of SMPS and USBasp to the Mainboard Insert Coil and Contact, with either of them Negated. Real-time simulation of NOT logic gate Make hardware connections for the NOT..
Outline: Connection of SMPS and USBasp to the Mainboard Insert two Contacts in parallel with a Coil in series Real-time simulation of OR logic gate Make hardware connections for the OR g..
Outline: Connection of SMPS and USBasp to the Mainboard Insert Contact and Coil and configure the Coil as Internal Relay Insert a new rung below Insert Contact and Coil in the new rung a..
Outline: Connection of SMPS and USBasp to the Mainboard Insert Contact and Coil and configure the Coil as SET-only Coil Real-time simulation of SET-only Coil Make hardware connections fo..
Outline: Connection of SMPS and USBasp to the Mainboard Insert Contact, OSR and Coil in the same order Real-time simulation of OSR Change cycle time to 3000ms and simulate the OSR logic ..
Outline: Connection of SMPS and USBasp to the Mainboard About Arithmetic instructions 4 Arithmetic Instructions - ADD, SUB, MUL, DIV Insert Contact and ADD instruction Real-time simulat..