Why it is necessary to connect cathode of rgb led to the push button?
In the video (9:55), when each time the push button is pressed they get a single color but as per the program they should get the led sequence for every push... someone explain this
I have used 220k ohms register, when I am connecting the longest pin of the tri-color LED to GND it is not working, but when I am shifting the pin to 3.3v its works(RGB Emitted), and when the pin is shifted to any other pin of the power row, 4 types of light are emitted by the led (white, yellow, turkeys blue, pink ) not RGB. where I am going wrong. please Help
Push button program is not showing any output .My led keeps blinking whether the button is pressed or not.What to do now?
Tutorial 6: Arduino with Tricolor LED and Push-button - EnglishTime: 8:10The video has an explanation but I am not able to understand why we need to use register between pin no 4 and Anode pin of LED.
Wrong microcontroller found. Did you select the right board from the Tools > Board menu?
How to change the contrast of the LED How to calculate the Resistor values needed to change the contrast
Can we create arduino based car?
22896 visits
Outline:Tricolor LED - Common Cathode Tricolor LED Other external devices that are required for this experiment Understand the connection circuit details Connect a tricolor LED to Arduino board Write a program to blink tricolor LED Write the code for the Void loop function Compile and upload the program Use Pushbutton to control the blinking Why to give the mode as INPUT How to reduce the delay of the blink
Tricolor LED - Common Cathode Tricolor LED Other external devices that are required for this experiment Understand the connection circuit details Connect a tricolor LED to Arduino board Write a program to blink tricolor LED Write the code for the Void loop function Compile and upload the program Use Pushbutton to control the blinking Why to give the mode as INPUT How to reduce the delay of the blink
Show video info
Pre-requisite